Parts Handling Options
Roll conveyor systems are ideal for structural shapes, plate or fabrications that can be moved on a conveyor system through the blast cabinet.
Parts are suspended from an overhead monorail and conveyed through the blast cabinet providing complete coverage of all components in one pass. Monorails provide a convenient interface to prior and subsequent processing allowing the blast system to be inserted in a continuous production line.
Ideal for blast cleaning long, round tubes or bars. Parts are “screwed” through the blast system on a conveyor system formed of rolls aligned at a skewed angle to the work opening. The skewed rollers rotate the material as it travels forward.
Designed for high production blast cleaning of rebar or similar bars, this shotblast system utilizes a grooved powered roll conveyor system to move multiple round parts, rebar or similar, through the blast simultaneously. Multiple lengths are fed into the blast cabinet at the same time allowing for consecutive sets of bar to be loaded, creating a continuous blast cleaning process for high volume processing.
Very large components, such as long bridge beam fabrications, are carried through the blast system on rail mounted work cars. This allows very heavy components to be processed on a pass through basis.
Structural shapes, plates and manufactured components pass through a blast chamber.
Designed around the parts that need to be blasted. To find the most effective solution for your facility, a MetFin representative will do an analysis of your parts and production system to determine a wheel configuration and parts handling process to best meet your needs.